Idiomas disponibles
Idiomas disponibles
11.3. How to use the machine
The MT Dry 500 is designed to process the product in a horizontal position, as shown in the following image. It is
necessary to place it on a flat surface without irregularities, ensuring its stability and a good working position for the
user. To ensure that it is in the working position, it is necessary to check that the knob located on the right side of
the equipment is blocking the rotation of the main body.
The main body of the machine can be tilted to facilitate product loading and unloading tasks..
Product input
IMPORTANT: To input the product, it is essential that the equipment is stopped.
First of all, it is necessary to remove the front cap of the barrel, loosen the two side handles, without removing them,
and pull or lift the enabled side positioner by making a quarter of a turn. Once the main body of the machine has
been tilted to the desired position, as shown in the following image, lock it by squeezing the two knobs. Then, you
can proceed to insert the product into the barrel.
Product removal
IMPORTANT: To remove the product, it is essential that the equipment is stopped.
29
www.masterproducts.es
