Idiomas disponibles
Idiomas disponibles
First of all, it is necessary to insert, as shown in the following image, the shaft
through the hole in the frame brac-
J
ket
. Then, assemble the following components following the sequence shown and finally fix them by tightening
A
the fastening ring screw
with the help of a No. 3 Allen key.
G
Carry out the same process on the opposite side of the shaft.
Remove the two levelling knobs from both sides of the main body of the MT Dry 500.
Place the main body
of the MT Dry 500 on the frame
making sure that the two shafts on each side fit into
B
A
the slots on the frame. Next, assemble the security plates
and fix them with the help of a hexagonal spanner
L
No. 10 and the four fixing screws
supplied.
K
26
www.masterproducts.es
