Idiomas disponibles
Idiomas disponibles
Mesh filter
Clean the mesh filter of the water hose once or twice a year.
NOTE
If the mesh filter is clogged, the "4C" information code appears on the the washer's
display.
DC68-03768A-10_IB_WV9900M_EN.indd 57
1. Turn off the washer, and then unplug
the power cord.
2. Close the taps.
3. Loosen and disconnect the water hose
from the back of the washer. Cover the
hose with a cloth to prevent water from
gushing out.
4. Use pliers to pull out the mesh filter
from the inlet valve.
5. Submerge the mesh filter deeply in
water so that the threaded connector is
also submerged.
6. Dry the mesh filter completely in a
shaded area.
7. Reinsert the mesh filter into the inlet
valve, and reconnect the water hose to
the inlet valve.
8. Open the tap.
English 57
2023-06-27
7:18:46
