11.10 How to use: Tank emptying
Use it after cooking with steam heating function to remove the residual water from the water
drawer.
Turn off the oven and wait until it is cold.
Step 1
Place the deep pan on the first shelf position.
Step 2
Select: Menu / Cleaning / Tank emptying.
Duration: 6 min
Step 3
Turn on the function and follow the instruction on the display.
Step 4
When the function ends, remove the deep pan.
When this function works, the lamp is off.
11.11 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
WARNING!
The door is heavy.
Step 1
Fully open the door.
Step 2
Lift and press the clamping levers
(A) on the two door hinges.
Step 3
Close the oven door to the first opening position (approximately 70° angle). Hold the door at both
sides and pull it away from the oven at an upwards angle. Put the door with the outer side down on
a soft cloth on a stable surface.
Step 4
Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
Step 5
Pull the door trim to the front to re‐
move it.
Step 6
Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
Before you start:
CAUTION!
Carefully handle the glass, especially
around the edges of the front panel. The
glass can break.
2
B
Remove all accessories.
A
A
1
ENGLISH
57