Idiomas disponibles
Idiomas disponibles
3. If the hydraulic oil level is too low, it is necessary
to replace the hydraulic oil. Refer to
hydraulic oil and hydraulic oil filter on page 20 .
4. The hydraulic oil level must be filled to the middle in
the indicator.
To replace the hydraulic oil and hydraulic oil filter
WARNING:
to your skin. Clean spills with soap and
water.
WARNING:
hydraulic oil filters are dangerous to the
environment. Discard used chemicals at an
applicable disposal location.
Note:
It is faster to drain the hydraulic oil if the oil is
warm.
1. Stop the product on a level surface and remove the
ignition key.
2. Put a container below the hydraulic oil drain plug.
Refer to the label on the product where the oil drain
plug is located on your product.
3. Remove the hydraulic oil drain plug (A).
20
To replace the
Hydraulic oil is dangerous
Used hydraulic oil and
A
4. Remove the hydraulic oil filter cover.
5. Turn the hydraulic oil filter counterclockwise to
remove it.
6. Remove the hydraulic oil cap (B).
B
1998 - 001 - 03.07.2023
