Idiomas disponibles
Idiomas disponibles
USING THE STAND MIXER
ASSEMBLING THE STAND MIXER
Check to be sure that the Stand
1
Mixer is unplugged, and the speed
control is turned to "0".
NOTE: To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction.
Attach the bowl: Place the bowl on
the bowl clamping plate and gently
3
turn it in a clockwise direction to
lock it into place.
6 | USING THE STAND MIXER
Raise the motor head: Slide the
locking lever to the unlock position
2
and lift the motor head. Once lifted,
slide the locking lever to the lock
position to keep the motor head up.
Attach any accessory: Slip the
accessory onto the beater shaft and
press upward as far as possible. Turn
4
the accessory counterclockwise to
hook the accessory over the pin on
the shaft.
