Idiomas disponibles
Idiomas disponibles
Maintenance
Emptying the water tank
Empty the water tank after each use to prevent leaks.
NOTE
If the dryer displays the "Empty the tank" message and stops while drying is in progress, empty the water
tank and tap and hold
58
English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 58
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 58
1. Remove the water tank (A) from the dryer.
• The water tank is heavy. Slowly remove the water
• Be careful when removing the full water tank. It is
2. Empty the water through the drain hole (B), and then
3. Place the water tank back into place.
. The "Empty the tank" message will disappear, and the dryer will resume drying.
-
Pull the water tank handle with one hand until the
tank is halfway out.
-
Once the water tank is halfway out, support the
bottom of the tank with the other hand and pull it
slowly with both hands.
CAUTION
tank using both hands while keeping the tank at a
level.
very heavy and can cause injury if you drop it.
clean inside the water tank.
-
Mix some neutral detergent in lukewarm water.
Fill the water tank with the mixture through the
drain hole (B) and leave it for 30 minutes. Then,
rinse the tank with clean water and completely
dry it.
2023/6/29 15:28:06
2023/6/29 15:28:06
