Black and Decker HNVC215B Manual De Instrucciones página 6

English
is suitable for the wall type and is appropriate to the weight
of the appliance.
1. Mark the location of the base charger screw holes
the wall (within reach of an electrical outlet for charging
the vacuum while it is on the wall bracket).
2. Fix the base charger to the wall using appropriate
screws and plugs for the type of wall, and weight of the
appliance.
3. Hang the appliance by placing the opening of the
vacuum base over the hook
Fig. B
Charging the battery

WARNING:
charger.

WARNING:
empty all contents and dry thoroughly if needed to
avoid damage to your appliance.
1. Before first use, the battery must be charged for at least
10 hours.
2. Place the appliance on the charging bracket whenever
it is not in use.
3. Make sure the appliance is switched off.
4. Place the appliance on the base charger
5. Plug in the charger
5
6. Leave the appliance to charge for at least 9 hours.
nOTE: While charging, the charger may become warm. This
is normal and does not indicate a problem. The appliance
can be left connected to the charger indefinitely.

WARNING:
at ambient temperatures below 39 °F (4 °C) or above
104 °F (40 °C).
Charging Indicator LED
1. While charging, the red LED on the charger
illuminate.
2. When charging is completed, the red LED will turn off.
Switching On (Fig. C)
1. To switch the appliance ON, press and hold the On/Off
button 1 .
2. Once the button is released the vacuum will turn Off.
4
9 on the base charger.
8
9
For use only with the supplied
Before charging, be sure to
6 .
.
Do not charge the battery
5 will
Fig. C
1
8 on
Dry pick up
For everyday spills of dry material.
- Do not fill the dust bowl
intake chute.
Optimizing the suction force
In order to keep the suction force optimized, the filters must
be cleared regularly during use.
Emptying and cleaning the product
Removing the dust bowl and filter (Fig. D–F)

WARNING:
should be cleaned regularly.
1. Press the bowl release button
bowl 3 straight off as shown in Fig. D.
2. While holding the dust bowl over a trash can, pull out
the filter 10
in Fig. E and F.
3. Insert cleaned filter
4. To replace the dust bowl, push it back onto the handle
until it clicks firmly into place.

WARNING:
without the filters. Optimum dust collection will only
be achieved with a clean filter.
Fig. D
2
3 beyond the end of the
The filter is reusable and
2 and pull the dust
, 11 / 12 to empty the contents as shown
10 back into the dust bowl
Never use the appliance
3
3 .