Worx Sonicrafter WX686 Manual De Instrucciones página 9

OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
INTENDED USE
The power tool is intended for sawing and remodeling
wooden materials, plastic, plaster, non-ferrous metals and
fasteners (e.g. nails and clamps) as well as for working on
soft wall tiles and for dry grinding of small surfaces. It is
especially suitable for working close to edges and for flush
cutting.
ASSEMBLY AND OPERATION
Action
Mounting accessories
--Remove the onboard Clip-in wrench
--Loosen the flange and insert accessories
--Tighten the flange
--Store the onboard Clip-in wrench
Operating the on/off switch
Using the variable speed dial
The Variable Speed Dial can be used to set the optimum
oscillating frequency according to the accessories used
and the respective application.
Oscillation
frequency
High oscillation
frequency
Low oscillation
frequency
Oscillating Multi-Tool
Figure
See Fig. A
See Fig. B1,
B2, B3
See Fig. C
See Fig. D, E
See Fig. F
See Fig. G
Application
Sanding, sawing, rasping and
polishing stone and metal.
Scraping, polishing
varnishes.
9
EN