Idiomas disponibles
Idiomas disponibles
•
The function can work in any cooking zone.
•
The cooking zone returns to its original setting after 5 minutes.
•
If the original heat setting equals 0, it will return to 9 after 5 minutes.
Flexible Area
• This area can be used as a single zone or as two different zones, accordingly to the cooking needs anytime.
• Flexible area is made of two independent inductors that can be controlled separately. When working as a single zone,
the part that is not covered by cookware is automatically switched off after one minute.
• To grant a correct pan detection and a even heat distribution, the cookware should be correctly placed:
- In the front or rear side of the flexible zone when the cookware is smaller than 22 cm
- Anywhere with bigger cookware
To activate the flexible area as a single big zone, simply press the Flexible
Area control.
The power setting works as any other normal area.
If the pot is moved from the front to the rear part (or vice versa), the flexible area detects automatically the new position,
keeping the same power.
To add a further pot, press again the dedicated keys, in order to detect the cookware.
To use the flexible area as two different zones with different power settings, press the Flexible Area control.
Varycook
• This area can set the power according to the position of the pot.
• If the pot is on the bottom of flexible area, the power is set to Level 1.
• If the pot is on the middle of flexible area, the power is set to Level 6.
• If the pot is on the top of flexible area, the power is set to Level 9.
To activate the Varcook area, simply press the Flexible Area control
for 2 second
Move the position of the pot, the power will change automatically
Press the Flexible Area control to turn off the cooking zone.
As big zone
As two independent zones
Varycook
Cancel V arycook
EN-12
