Spare Parts - simatherm IH 025 VOLCANO Manual De Usuario

E06 E Temperature probe not con-
nected (or defective)
E07 E Failure during current
measurement
E08 E Failure during communi-
cation with printed circuit
board
E09 E Overheated printed circuit
board
E10 E Grid undervoltage detected

8. Spare parts

190.1103 IH 025-P3
190.1105 IH 025-P4
190.1102 IH 025-P2
190.1104 IH 025-D
190.1008 IH 025/030/070-S
190.7101 IH 025-G
190.1101 IH 025-B
190.1001 IH P2
190.1002 IH PROTECTIVE GLOVES
© simatec ag Portable Induction Heater IH 025 VOLCANO
Check the temperature probe.
Return IH 025 for repair.
Return IH 025 for repair.
Wait until the printed circuit board
cools. Alternatively, the PCB tempera-
ture will be displayed. The device can
be re-started at a temperature below
40 °C (displayed as <40).
Connect the device to another socket or
shorten the extension cord.
Printed circuit board 100 V
Printed circuit board 115 V
Printed circuit board 230 V
Printed circuit board display
Power switch
Casing top with keyboard
Carrying case
K-type temperature probe
Protective gloves
29