Start-Up; Access To Main Menu; O Access To Parameters - DGFLOW DGFIT T/T 06 Manual De Uso Y Mantenimiento

mains
START
STOP
DGFIT has 4 MAIN MENU, to access the parameters
To ACCESS the 4 main MENU
Press the SET button for 3 sec.
BASIC PARAMETERS for the configuration of the drive.
BASIC
these parameters must necessarily be set during installation.
ADVANCED PARAMETERS for the configuration of the drive.
ADV
INSPECTION PARAMETERS, you can display the hours of work, the number of starts,
INSP
alarm history, etc..
TEST mode: start and stop the pump in manual mode and change the frequency in
TEST
steps of 1 Hz. Control of the operating parameters of the motor and inverter.
WARNING: DURING MANUAL OPERATION, AUTOMATIC CONTROLS ARE
EXCLUDED, AND THE OPERATOR MUST AVOID ANY INCORRECT OPERATION.
In the MAIN MENU:
BASE
-
ADVANCED
-
INSPECTION
-
-
TEST
STARTING
(10 sec)
IN SERVICE
OUT OF SERVICE

ACCESS TO MAIN MENU

To SCROLL the 4 MAIN
MENU use the buttons
ACCESS TO PARAMETERS

START-UP

In service
Out of
service
To SCROLL
and MODIFY
the parameters
use the
indicated keys
35
If the last shutdown was
in service
If the last shutdown was
out of service
To ACCESS and EXIT the
MAIN MENU use the buttons
To ENTER and
EXIT the
parameters use
the indicated
keys