Idiomas disponibles
Idiomas disponibles
IB_KH1172_E4908_LB5
What do I do if smoke comes from the baking space
6
or the ventilation slots
What has happened if the ingredients are not correctly
mixed or the bread is not correctly baked through?
7
Why does the display
appliance doesn't allow itself to be started?
23.07.2008
11:01 Uhr
0
?
show „H:HH" and the
Seite 48
• Remove the power plug immediately! Allow the appliance
to cool down, then remove the baking mould
Clean the exterior of the baking mould
0
the baking space
, as the smoke was probably cau-
sed by food residues. Should there be no food residues in
0
the baking space
or on the exterior surfaces of the
4
baking mould
, do not switch the appliance back
on. Make contact with the Customer Service department.
• A false programme has been selected.
• The button Stop/Start
operation.
• During the baking process there was an extended
power failure.
2
• The appliance lid
was opened several times during
the baking process.
q
• The kneading hook
is blocked.
Remove the ingredients and do not re-use them. Remove
4
the baking mould
and check to ensure that the drive
5
shaft
turns. Should this not be so, make contact with
our customer service department.
• The appliance is still too hot from the previous baking
process. Press the button Stop/Start
adjustments appear in the display
to cool down, with the lid
Afterwards, the appliance allows itself to be used as
normal.
- 48 -
4
.
4
as well as
has been pressed during
until the default
7
. Leave the appliance
2
open, for approx. 20 minutes.
