Premium PBS653H Manual De Uso Y Cuidado página 9

Idiomas disponibles

Idiomas disponibles

5.4 Install the flame spread cap:
Install the flame spread cap before using the hob.
Take the flame spread cap out of the packaging bag, put down the flame
cap .To make sure the flame spread cap is the right one, please check the
position of the ignition pin D is right below the protector C.
5.5 Connection to LPG
Use a pressure regulator and make the connection to the tank according to
the provisions of standard regulations in force. Make sure that feed pressure
conforms to the levels shown in the table in paragraph "Burner and nozzle
data tables"
5.6 Adapting to different types of gas
The appliance is tested with G20/G25 (2H) natural gas at the pressure of 20/25
mbar. If it is to be used with other types of gas, the burner nozzles have to be
changed and the gas taps adjusted to set the minimum flame. To replace the
nozzles, proceed as described below.
5.6.1 Changing the hob nozzles
⑴ Remove the panel, all the burner caps and the flame diffuser rings;
⑵ Use a 7 mm socket wrench to unscrew the burner nozzles;
⑶ Replace the burner nozzles depending on the type of gas to be used (see
point "Burner and nozzles data tables" ;
⑷ Put the burners back into place correctly.
8
loading