Stryker 0678001500 Manual De Operación página 12

4. Installation
To install the transmitter box, do the following:
1. Find a location for the Transmitter Box
that is on a flat surface clear of adjacent
obstructions. Make sure that the location is
within reach of the 6 ft video cable.
Caution
It is important to select the
location carefully, as the adhesive
is difficult to remove.
2. Prepare the installation surface area with
an alcohol pad. This is necessary for a
strong bond and to prevent damage to the
equipment.
3. Remove the adhesive back from the
bracket.
4. Press and hold the box assembly
against the prepared installation
surface for 10 seconds.
5. Connect the RJ-45 plug into the
"Link" port. Use a cable tie to attach
the cable to the hole in the standoff
at the top of the bracket. Give a
minimum 8-12" of cable from the
connector to the standoff.
Caution
Make sure to attach the cable to the bracket for strain
relief to prevent damage to the RJ-45 plug.
8
All manuals and user guides at all-guides.com