Idiomas disponibles
Idiomas disponibles
SM 2610028631 01-13_SM 2610028631 01-13.qxp 1/9/13 2:37 PM Page 13
ON/OFF switch (Fig. 12)
1. To turn the sander ON, move the switch (1) to the up
(ON) position.
2. To turn the sander OFF, move the switch to the down
(OFF) position.
3. To lock the switch in the OFF position:
a. Wait until the sander has come to a complete
stop.
b. Remove the safety key (2) from the switch
housing. Store the safety key in a safe place.
4. To unlock the switch and turn the sander ON, insert
the safety key into the switch, and move the switch to
the ON position.
Bevel sanding (Fig. 13)
1. The work table (3) can be tilted from 0° to 45° for
bevel sanding.
2. Loosen the table lock knob (4) and tilt the work
table to the desired angle.
3. Retighten the table lock knob.
To avoid trapping the work or
WARNING
fingers between the table and
sanding surface, the table should be repositioned
on the table support to retain a maximum of 1/16"
(1.6mm) distance between sanding surface and
table.
Operation
FIG. 12
13.
2
1
FIG. 13
MAX.
1/16
3
4
