Idiomas disponibles
Idiomas disponibles
ACCESSORIES
POTS AND PANS
Only use pots and pans made from ferromagnetic
OK
NO
material which are suitable for use with induction
hobs. To determine whether a pot is suitable,
check for the
bottom).A magnet may be used to check whether
pots are magnetic.
The quality and the structure of the pot base can alter cooking performance.
Some indications for the diameter of the base do not correspond to the
actual diameter of the ferromagnetic surface.
Empty pots or pots with a thin base
Do not use empty pots or pans when the hob is on. The hob is equipped with
an internal safety system that constantly monitors the temperature, activating
the "automatic off" function where high temperatures are detected. When
used with empty pots or pots with thin bases, the temperature may rise very
quickly, and the "automatic off" function may not be triggered immediately,
damaging the pan or the hob surface. If this occurs, do not touch anything,
and wait for all components to cool down.
If any error messages appear, call the service centre.
FIRST TIME USE
The hob settings can be changed at any time. To change the settings, click
on the
symbol that appears on the manage functions display.
From the settings menu, you can:
•
select the language;
•
adjust the brightness;
•
adjust the volume of the sound alerts;
•
adjust the button tones;
•
adjust the power of the hob;
•
check the software version installed;
•
restore the factory settings of the hob.
If a power failure occurs, the settings are maintained.
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, press the on button for approx. 1 second until the
displays light up.
The hob will be automatically deactivated after 30 seconds if you do not
select a function within this time.
The hob turns off if you press any button for more than 10 seconds.
To switch off, press the same button until the displays switch off. All the
cooking zones are deactivated.
If the hob has been in use, when you switch it off, all cooking zones will
be deactivated, and the residual heat indicator "H" will remain lit until the
cooking zones have cooled down.
SELECTING THE COOKING ZONE
The desired cooking zone can be selected from the left-hand display, by
pressing the corresponding pane. On all the not selected zones a lightly
stripe will appear.
SELECTING THE FLEXIBLE AREA
The flexible area is the area in which several of the cooking zones overlap,
and can be used as a single cooking zone.
symbol (usually stamped on the
Minimum diameter of pot/pan base for the different cooking areas
To ensure that the hob functions properly, the pot must cover one or more
of the reference points indicated on the surface of the hob, and must be of
a suitable minimum diameter.
POSITIONING OF ACCESSORY
centred on 1 point
2 points covered
3 points covered
4 points covered (horizontal)
4 points (2 + 2) covered (vertical)
ADJUSTING THE POWER OF THE HOB
The maximum power level of the hob can be set from the settings menu, in
accordance with requirements, or with the timer duration.
The power levels available are: 2.5kW – 4.0kW – 6.0kW – 7.4kW.
To create a flexible area:
Select multiple panes or slide your finger across, gradually joining the
panes together.
To divide a flexible area:
Press and hold the pane corresponding to the zone that you want to
separate for 3 seconds. Alternatively, press the "divide zone" button
appears in the manage functions display.
When the cooking zone is divided, the same level of power is set for each
of the separate zones.
If all the selected cooking zones are not covered by the pot in 30 seconds, a
dense striped will appear on the left-hand display. It's possible to reactivate
that area with the "Add pot" command using the right-hand display.
– 9 –
EN
MINIMUM DIAMETER
10 cm
19 cm
fish kettle/wire rack
fish kettle/wire rack
24 cm
that
