Haier HLP141E Manual Del Usuario página 15

3. Set Cycle and Start
To start drying a laundry load using Auto Dry with presets for Temperature
and Time, there are 3 easy steps:
1. Turn 'Power ON'
3. Press 'Start'
Status
Dry
Cooling
End Cycle
Clean Filter
Dry
Time
Note
Normal , Heavy and Delicate Cycles are auto-set for Temperature and Time to dry
a regular load. Timed Dry Cycle is for manual selecting Dry times and Tempera-
tures. (See next page for instructions)
4. Cooling Status.
When 'Cooling' Status LED is ON, the Cooling down time takes 10 minutes
for dryer along with the garments.
If you want to take out clothes in the middle of drying cycle, please use
caution and carefully take out the HOT clothes.
5. End Dry Cycle
A beeper alarm alerts you when the Drying Cycle ends, then the dryer will
power off. Take out the clothes as soon as possible.
6. Clean Filter
'Clean Filter' Status LED reminder goes ON. After drying each load of
clothing, always clean the lint filters.
Exhaust Vent
Casing
2. Choose drying Cycle –
Power
On/Off
Start
Pause
150
A
120
U Normal
T
O
90 Heavy
D
R
60
Delicate
Y
30 Timed Dry
Cycles Temp
2
Normal, Heavy or Delicate
High
Low
Air-Dry
Start
Pause
3
English
Cycles
Power
On/Off
1
14