Idiomas disponibles
Idiomas disponibles
Front Panel Controls
FRONT VIEW (P50X901)
PUSH TO OPEN
CONTROL DOOR
PHOTO INPUT
PUSH EJECT
PHOTO INPUT
PUSH EJECT
FRONT POWER button (P50X901 only)
Press this button to turn the Plasma Television
ON/OFF. It can also be turned ON/OFF by remote
control. The "MAIN POWER" button must be at
stand-by mode.
MENU/SELECT button
This button allows you to enter the MENU, making
it possible to set TV features to your preference
without using the remote. This button also serves
as the SELECT button when in MENU mode.
HDMI-FRONT
Use the front HDMI input for external devices such
as Set-Top-Boxes or DVD players equipped with an
HDMI output connection (see page 16 for reference).
INPUT/EXIT button
Press this button to access the INPUT menu.
Press again to exit the MENU mode.
CHANNEL selector
Press these buttons until the desired channel
appears in the top right corner of the TV screen.
These buttons also serve as the cursor down ( )
and up ( ) buttons when in MENU mode.
VOLUME level
Press these buttons to adjust the sound level. The
volume level will be displayed on the TV screen.
These buttons also serve as the cursor left ( ) and
right ( ) buttons when in MENU mode.
12
FRONT VIEW (P60X901)
PUSH TO OPEN
CONTROL DOOR
FRONT PANEL CONTROLS (P50X901)
FRONT PANEL CONTROLS (P60X901)
POWER button
Television MAIN POWER button (P50X901 only)
This power button is for the complete system, and
must be turned ON/OFF manually. It is
recommended to leave the "MAIN POWER" to ON
condition (lights red) for stand-by mode.
For P60X901 model this is not Main Power button,
but the Power button, for "MAIN POWER" operation
you must unplug AC cord from TV set or wall outlet.
After this button is pressed for power ON, the function
of POWER button will not be available only for a
period until the picture appears on the TV screen.
NOTE:
When the "MAIN POWER" button is set to
OFF or the TV is unplugged, the clock will
stop and may eventually reset itself.
The Main Power
button is located
on the broadside
bottom, under the
mark "
".
(P60X901 only)
Power button is
under the mark
I
"
".
