Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• Open the lid 1 and insert a filter bag (Size 1x4)
with folded over sides into the filter holder 2.
Using the measuring spoon w place coffee
powder into the filter bag. Subject to taste, you
will require approx one level measuring spoon w
of coffee powder per cup. A level measuring
spoon w approximates to about 5,5 gr of coffee
powder.
• Fill the water tank 3 with the required amount
of water. For this, use the scale 9.
Never fill the appliance with water beyond the
max-marking (12 cups).
• Close the lid 1, ensuring that it engages.
• Place the glass carafe q in the coffee machine.
• Press the button ON/AUTO/OFF 7 to start the
brewing process. The red indicator lamp integrated
into the ON/AUTO/OFF button 7 glows.
• When the brewing process is finished you can
remove the glass carafe q and serve the coffee.
If you do not wish to serve the coffee immediately,
allow it to stand in the coffee machine. The keep-
warm plate 0 will keep the coffee warm for 2
hours. After two hours the coffee machine switches
itself off automatically.
• If you wish to switch the coffee machine off
manually, press the button ON/AUTO/OFF 7
twice so that the integrated blue indicator lamp
glows constantly. After approx. 15 seconds this
extinguishes. The coffee machine is now
switched off.
Note:
Allow the coffee machine to cool down for approx. 5
minutes before commencing a further brewing process
or filling it with water.
Timer-Function
By use of the button PROG 6 you can programme
the coffee machine so that it starts the brewing process
at a pre-determined time. First, ALWAYS place cof-
fee powder in the filter bag in the filter holder 2
and water into the water tank 3.
Place the glass carafe q in the coffee machine.
Ensure that the water tank 3 is not filled beyond
the Max. marking (12 cups).
• Press the button PROG 6 twice, so that TIMER
appears in the display 8.
• Programme in the desired start time with the button
HOUR 4 and the button MIN 5 (see chapter
"Setting the Time").
• When the desired start time has been programmed
in, press the button ON/AUTO/OFF 7 twice.
The integrated blue indicator lamp blinks and
indicates thereby that the Timer is programmed.
The coffee machine starts the brewing process
at the programmed time.
• If you wish to deactivate the Timer, press the button
ON/AUTO/OFF 7 again so that the integrated
blue indicator lamp glows constantly.
Cleaning and care
Before cleaning, always remove the plug from the
wall power socket.
Risk of electric shock!
Before you clean the coffee machine you must remove
the plug from the mains power socket.
Attention!
Never submerse the coffee machine in water or other
fluids.
Risk of Burns!
Always wait until the coffee machine has cooled
down before cleaning it.
• Do not use household detergents or sharp/pointed
objects to remove soiling. These could damage
the appliance.
• Wipe the housing of the coffee machine and the
glass carafe with a soft cloth lightly moistened
with a soapy solution.
- 22 -
Capítulos
Tabla de contenido
