Idiomas disponibles
Idiomas disponibles
Heating and cooking
Microwave operation
Notice!
During the cooking process, drops of water can form
on the oven door or on the housing. This is normal and
is not an indication of a malfunction.When the appli-
ance has cooled down, wipe the moisture off with a
dry cloth.
Risk of fire!
Never use the grill stand t or other metallic objects
when you are using the appliance in the microwave
mode. Metals reflect the microwave radiation and it
leads to the generation of sparks. This could cause
a fire and irreparably damage the appliance!
Selecting the operation level
Press the button Operation r
•
priate number of times to set the required power
level.
•
1x for 800 Watts of power (P800).
2x for 700 Watts of power (P700).
•
3x for 600 Watts of power (P600).
•
•
4x for 500 Watts of power (P500).
5x for 400 Watts of power (P400).
•
6x for 300 Watts of power (P300).
•
•
7x for 200 Watts of power (P200).
•
8x for 100 Watts of power (P100).
The power setting level is indicated in the display 1
(e.g. P800 at 800 Watts of power).
Programming the cooking time
After you have selected the power level, programme
in the desired cooking time:
Turn the control dial q, until the desired cooking
•
time has been programmed in.
The increments for setting the time with the control
dial q are as follows:
•
from 10 sec. to 5 min: in 10 second increments
•
from 5 to 10 min: in 30 second increments
•
from 10 to 30 min: in 1 minute increments
•
from 30 to 95 min: in 5 minute increments
Aborting/stopping an input process
Press the button Stop 0
input of data. The appliance reverts to standby mode.
Starting the cooking process
When you have programmed in the power level
and the cooking time, and the symbol
the display 1, you can start the cooking process:
To start the cooking process, press button Start/
Quickstart q
bols for microwave operation
the appro-
(Power P100 - P400) or
P800).
The programmed time starts to count down.
Interrupting the cooking process
Press the button Stop 0
process . The appliance interrupts the cooking process
and stops the remaining time. Press the button
Start/Quick start q
cess.
Abort the cooking process
Press the button Stop 0
process. The appliance reverts to standby mode.
Cooking process is finished
When a cooking process is complete, "End" appears
in the display 1 and 4 signal tones sound. If the
door of the microwave is not opened, the signal
tones sound again after about 2 minutes.
- 46 -
once to cancel or end
.In the display 1 appear the sym-
and cooking
(Power P500 -
once to interrupt a cooking
to continue the cooking pro-
twice to stop the cooking
blinks in
