Tabla de contenido
nMPORTANT SAFETY
UNSTRUCTt!ONS
Your sewing machine is designed and constructed only for HOUSEHOLD use.
Read all instructions before using this sewing machine.
DANGER
--To
reduce
the risk of electric
shock:
1. A sewing machineshould
never be left unattended when plugged in. Always
unplug this sewing machine from the electric outlet immediately
after using
and before cleaning.
2. Always unplug before replacing sewing machine
bulb. Replace bulb with
same type rated 15 Watts.
3. Do not reach lora
sewing machine
that has laflen into water.
Unplug
immediately,
4. Do not place or store sewing machine where it can tall or be pulled into a tub
or sink. Do not place or drop into water or other liquid.
WA RN NG -Tored u ce t he ,s,of b u.os. ,re. e lecfric
shook. or ory
to persons.
1. Do not allow to be used as a toy. Close attention is necessary when this
sewing machine is used by or near children.
2. Use this sewing machine only for its intended use as described in this manual
Use only attachments
recommended
by the manufacturer
as contained in
this manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into water.
Return the sewing machine to the nearest authorized dealer or service center for
examination,
repair, electrical or mechanical adiustment.
4. Never operate the sewing machine wilh any alr opening blocked. Keep ventilation
openings of the sewing machine arid foot controller free from accumulation
of lint, dust, and loose cloth.
5. Never drop or insert any obiect into any opening.
6. Do not use outdoors.
7. Do net operate where aerosol (spray) products are being used or where
oxygen is being administered.
8. To disconnect, turn all controis to the off _"0") position, then remove plug
from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around
the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle
to break.
12. Do not use bent needles.
13. De not pull or push fabric while stitching, tt may deflect the needle causing it
to break.
14. Switch the sewing machine off ("0 °') when making any adjustment
in the
needle area, such as threading needle, changing needle, threading bobbin,
or changing presser foot, and the like.
15. Always
unplug
the sewing
machine
from the electrical
outlet
when
removing
covers,
lubricating,
or when making any other adjustments
mentioned in the instruction manual
SAVE THESE UNSTRUCTIONS
Tabla de contenido
