Hilti Nuron DSH 600-22 Manual De Instrucciones Original página 17
Ocultar thumbs
Ver también para Nuron DSH 600-22:
- Manual de instrucciones (320 páginas) ,
- Manual de instrucciones original (340 páginas) ,
- Manual de instrucciones (18 páginas)
Idiomas disponibles
Idiomas disponibles
Status
All LEDs show in sequence, followed by one (1)
LED showing constantly green.
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
3.7
Items supplied
Cordless cut-off saw, D60 flange for diamond cut-off wheels, arbor locking pin, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4
Technical data
4.1
Product properties
Weight in accordance with EPTA Procedure 01,
without battery
Max. wheel diameter
Max. cutting depth
Tightening torque (securing screw)
Max. speed (drive spindle)
Max. permissible water pressure
Arbor hole, cut-off wheel / diameter of centering
collar of centering bushing (reversible)
4.2
Cut-off wheels
Min. flange outside
diameter
Max. nominal wheel
thickness
Max. speed (cut-off wheel)
*2284138*
Abrasive cut-off wheel
Diamond cut-off wheel
Steel-core wheel
Composite wheel
2284138
Meaning
The battery can remain in use.
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
DSH 600-22
8.5 kg
(18.7 lb)
300 mm
(11.8 in)
120 mm
(4.7 in)
20 Nm ... 30 Nm
(15 ftlb
... 22 ftlb
)
f
f
5,080 /min
(84.7 Hz)
6 bar
(90 psi)
20 mm or 25.4 mm
(0.8 in or 1.00 in)
DSH 600-22
78 mm
(3.1 in)
60 mm
(2.4 in)
4 mm
(0.2 in)
4.5 mm
(0.18 in)
5,080 /min (≙ 79.8 m/s)
(84.7 Hz (≙ 261.8 ft/s))
DSH 700-22
8.8 kg
(19.4 lb)
300 mm
(11.8 in)
120 mm
(4.7 in)
20 Nm ... 30 Nm
(15 ftlb
... 22 ftlb
)
f
f
5,080 /min
(84.7 Hz)
6 bar
(90 psi)
20 mm or 25.4 mm
(0.8 in or 1.00 in)
DSH 700-22
78 mm
(3.1 in)
60 mm
(2.4 in)
4 mm
(0.2 in)
4.5 mm
(0.18 in)
5,080 /min (≙ 79.8 m/s)
(84.7 Hz (≙ 261.8 ft/s))
English
11
