Idiomas disponibles
Idiomas disponibles
EN
Oscillo-Saw GOLD II Accu
8 Cleaning and maintenance
Danger of injury through unintentional
activation.
Remove accumulator before cleaning and
maintenance
The following measures should be performed once a week or more often if the saw is used
frequently:
Clean the cooling slots to ensure sufficient ventilation for cooling the motor.
Clean the motor compartment from the outside with a jet of dry compressed air.
Wipe disinfection is suitable for motor housing, accumulator and all accessories, such as saw blades and
an open-end wrench. For this purpose, we recommend products with a pH-value within 9-10, e.g.
MediClean forte from Dr. Weigert.
It is important to ensure that the disinfecting liquid does not enter the interior of the motor.
25
