KitchenAid KCM1209 Manual Del Usuario página 12

TROUBLESHOOTING
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Problem
If the display is not illuminated:
If only a portion of the water
added to the Coffee Maker
actually brews:
Coffee Maker takes longer than
usual to brew:
If you hear 3 rapid tones:
If "Er1" flashes on the display
and you hear 1 tone:
If coffee overflows the Brew
Basket:
If water exits from the back of
the Coffee Maker:
If the problem is not due to one of the above items, see the "Warranty and Service"
section.
Do not return the Coffee Maker to the retailer. Retailers do not provide service.
NOTE:
12
W11418578A.indb 12 W11418578A.indb 12
WARNING
Electrical Shock Hazard
Check if the Coffee Maker is plugged into a grounded 3
prong outlet. If it is, check the fuse or circuit breaker on
the electrical circuit the Coffee Maker is connected to and
make sure the circuit is closed.
The Coffee Maker requires immediate descaling. Please
refer to the "Care and Cleaning" section.
There is no water in the Water Tank. See the "Filling water
for brewing" section.
A button may be jammed. Unplug and press each button
several times. Plug the Coffee Maker. If "Er1" appears
again on the display, repeat this procedure.
The Brew Basket is not correctly in place.
See the "Assembly Of Brew Basket" section.
Too much coffee ground was placed into the Brew Basket.
Used both Gold Tone Filter and Paper Filter together.
Too much water was poured into the Water Tank.
Solution
2/19/2020 2:21:18 PM 2/19/2020 2:21:18 PM