Hitachi RAK-18PPB Manual De Instrucciones página 54

WEEKLY TIMER OPERATION
Step 2: Select Mode A or Mode B and activate or deactivate WEEKLY TIMER.
1
NOTE
When setting ONCE TIMER, operation of WEEKLY TIMER is interrupted. After ONCE TIMER operation
●
is complete, WEEKLY TIMER operation will be activated.
When ONCE TIMER is cancelled, operation of WEEKLY TIMER is also cancelled. Need to set WEEKLY
●
TIMER operation for activation.
After auto restart, WEEKLY TIMER operation is cancelled. Need to set WEEKLY TIMER operation for
●
activation.
All manuals and user guides at all-guides.com
■ How to select Mode A or Mode B of WEEKLY TIMER setting.
1
1. Press (WEEKLY) button.
2
(Normally Mode A will blink first).
2. Press (WEEKLY) button again.
3. Select Mode A or Mode B. Press
remote controller towards the indoor unit for about 3 seconds. Timer lamp
on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, TIMER lamp will light up.
3
Please ensure that the TIMER lamp lights up.
This indicates that Mode A or Mode B selection and active WEEKLY TIMER
have been confirmed.
■ Setting non-active WEEKLY TIMER .
1. Direct the remote controller towards the indoor unit and press
(CANCEL) button.
Beep sound will be emitted from indoor unit and TIMER lamp will be OFF.
Reservation indication on remote display will also disappear.
This indicates that non-active WEEKLY TIMER has been confirmed.
To activate back the setting of WEEKLY TIMER , repeat the steps for
●
"How to select Mode A or Mode B of WEEKLY TIMER setting".
– 22 –
and blink on the display.
and blink on the display.
(SEND) button while directing the