Location; Installation - Hoshizaki DIM-30DE-1 Manual De Instrucciones

ENGLISH

4. LOCATION

This ice dispenser is not intended for outdoor use.
The ice dispenser should not be located next to ovens, grills or other high heat producing equipment.
This appliance is not suitable for installation in an area where a water jet could be used.
The location should provide a firm and level foundation for the ice dispenser.
Do not place anything on top of the ice dispenser or in front of the louver.
Normal operating ambient temperature should be within 1°C to 40°C. Water connection is cold water only. Operation of the ice
dispenser, for extended periods, outside of these normal temperature ranges may affect production capacity.
Allow the clearance specified below for proper air circulation and ease of maintenance and/or service should they be required.
In some high humidity environments, condensation may form inside the machine and drip onto the floor. Do not install where
the floor can be affected by water.

5. INSTALLATION

Incorrect installation can cause harm to people, animals or other items, for which the manufacturer cannot be held
responsible.
* Place the ice dispenser in the selected permanent site.
* Adjust the four legs on the bottom (adjustable up to 4.5 cm) to have the ice dispenser perfectly horizontal. Use a spirit level.
* Secure the ice dispenser to the wall by using the braces (accessories) and mounting screws (not supplied). Bend the braces
according to the installation condition.
WARNING
CAUTION
NOTICE
IMPORTANT
Side View
Front
DISPENSER
CAUTION
Adjustable Leg
Top
20cm
Rear
ICE
10cm
4
Brace Machine
Screw (M4)
Mounting Screw