Siemens SIMATIC NET SCALANCE PSP9230PoE Instrucciones De Montaje página 23

100-240 V AC / 110-250 V DC input
NOTICE
Turn off the power supply before you insert or remove the plug of the power supply.
To connect the power supply, proceed as follows:
1. For connection to the 100-240 V AC / 110-250V V DC output, use a copper cable of category 15 AWG or a cable with a cross-
section 1.5 mm
2
2. Connect the connector and socket. Make sure that they lock in place correctly.
3. Tighten the knurled screw (torque 1 Nm).
Power supply of the SCALANCE PSP9230PoE
A5E51309689-AA, 02/2023
Pin number Contact
1 L
2 Do not connect
3 N
PE PE
English
Assignment
100 to 240 V AC: Line conductor
110 to 250 V DC: L+
-
100 to 240 V AC: Neutral conductor
110 to 250 V DC: Mass
Protective conductor
23