Siemens SIMATIC NET SCALANCE PSP9230PoE Instrucciones De Montaje página 16

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
English
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE directive 2012/19/EU for the
disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified disposal company for electronic
scrap or your Siemens contact (Product return).
Note the different national regulations.
2
Scope of delivery
The following components are supplied with the product:
A SCALANCE PSP9230PoE power supply
Four self-tapping screws M5 x 20 for mounting a SCALANCE PSP9230PoE power supply on a rack
Two adapter plates for mounting a SCALANCE XP216 or SCALANCE XP216PoE on the SCALANCE PSP9230PoE power
supply
Four countersunk head screws M5 x 16 in accordance with ISO 14581 for securing the adapter plates to the SCALANCE
PSP9230PoE power supply
Note
The screws M5 x 20 (maximum head diameter 9.5 mm) for mounting the SCALANCE XP216 or SCALANCE XP216PoE on the
adapter plates are not included in the scope of delivery.
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to the specification.
If you use damaged parts, this can lead to the following problems:
Injury to persons
Loss of the approvals
Violation of the EMC regulations
Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
16
Power supply of the SCALANCE PSP9230PoE
A5E51309689-AA, 02/2023
loading