Idiomas disponibles
Idiomas disponibles
C - INSTALLATION
• Click the
icon then scan the QR code on the camera. If your camera is correctly connected to the
internet, it will be automatically added.
NOTE: If it is not added automatically and the application asks you to choose between LAN and WiFi, your
camera or smartphone is having problems accessing the internet. Check the connection of your camera,
smartphone or tablet, and perform a camera reset by pressing the WPS/Reset button for more than 15
seconds.
2.3 - WIRED CONNECTION
If you do not want to use a wireless connection, connect your camera to the Internet using an RJ45
network cable.
Modem/router
connected to
the internet
IMPORTANT: Do not connect your camera to your computer. This will not provide it with access to the
internet.
In most cases, the camera is immediately detected by the modem/router, which grants it access to the
Internet. After a few seconds, the camera's network activity LED should flash.
• Click the
icon then scan the QR code on the camera. If your camera is correctly connected to the
internet, it will be automatically added.
NOTE: If it is not added automatically and the application asks you to choose between LAN and WiFi, your
camera or smartphone is having problems accessing the internet. Check the connection of your camera,
smartphone or tablet, and perform a camera reset by pressing the WPS/Reset button for more than 15
seconds.
Note: if you want to use your camera with WiFi but cannot use either the WPS function or the EzLink
function, set it up with a wired connection so that you can then move to a wireless connection.
10
EN
MOTORISED 1080P IP WIFI CAMERA
camera
u
. e
i t y
u r
e c
n s
s o
m
o
t h
w .
w
w
Mains adapter
