Guardian Technologies AC151 Instrucciones De Uso Y Cuidado página 6

Idiomas disponibles

Idiomas disponibles

IMPORTANT: The air purifier is shipped with the filter stored in the filter compartment.
The filter is shipped in a bag to prevent degradation. Before using, remove and discard bag.
Note: Proper filter and bottom filter panel installation is necessary for the unit to turn on and run.
BEFORE OPERATING THE AIR PURIFIER
Select a firm, level and flat location for the air purifier.
• For proper air flow, locate the unit at least 1 foot from any wall or furniture.
• Make sure none of the grills are blocked.
1. Turn the unit power ON. The control panel power lights will turn on.
Note: the corresponding control panel lights will turn on depending on features selected.
2. Fan Speeds (1-3)
Press the fan speed button once for low speed, twice for medium, and three times for
high speed.
3. UV-C
To activate the UV-C light, press the UV-C button. Press the button again to turn off the
UV
UV-C light.
UVC Reset – The UV-C light will flash when it's time to change the bulb. Replace the bulb
according to the instructions (page 8). Press and hold the UV-C light button for 5 seconds
to reset the light.
4. Sleep Mode
Press sleep icon to dim display lights. When activated all control panel lights will shut
off. The air purifier will run in the ultra-quiet sleep mode speed (one speed lower
than speed 1). NOTE: If the night light is on when entering sleep mode, the nightlight
will remain on while display lights shut off. If nightlight is off when entering sleep mode,
the nightlight will remain off. To exit sleep mode, press any icon on the control panel.
5. Child Lock
To activate child lock, press and hold for 3 seconds to lock the control panel, so controls
cannot be adjusted. Press and hold for 3 seconds again to turn the feature off.
6. Filter Reset
The filter reset indicator will light up when it is time to replace the filter. Replace the filter
according to the instructions (page 7). After replacing the filter, press and hold filter reset
button for 5 seconds to reset the filter indicator light.
7. Timer
If you prefer to run the air purifier for a specific number of hours, you can select
2, 4 or 8 hours by pressing the button and selecting the preferred time.
8. Night light
Press the night light button to activate the night light feature. Press again to turn off.
E-6
OPERATING INSTRUCTIONS
OPERATING THE AIR PURIFIER
loading