Idiomas disponibles
Idiomas disponibles
RESETTING THE AIR PURIFIER
The air purifier is equipped with a motor protection circuit. If activated, the motor will turn off.
To restart the unit, unplug the unit for at least 10 minutes, then plug back in and power on for
normal operation.
Note: if the unit continues to shut down, there may still be an abnormal condition and the unit
may need service. Contact Customer Service.
The "Filter Reset" indicator will light when it is time to replace your filter. Depending on usage
and environmental conditions the filter will last approximately 6 months. The inside pleats of the
filter will turn from white to grey when it is dirty and needs replacing. It is important to maintain
and change the filter to continue to optimize the performance of the air purifier.
IMPORTANT: Do NOT wash and re-use the filter. Please contact Customer Service to purchase
a replacement filter or visit guardiantechnologies.com.
REMOVE AND REPLACE FILTER
1. Turn off and unplug the unit 2. Flip the unit to access the bottom panel.
3. Turn the filter cover to the
left to open.
6. Replace new filter and place
filter cover back on.
8. Reset the filter indicator by holding the filter reset button for 5 seconds.
FILTER REPLACEMENT
4. Lift the filter cover off
of the unit.
7. Line up the unlock icon on the bottom cover with the arrow
on the edge of the base of the unit. Twist the bottom cover to
the right to lock, lining up the lock icon with the arrow on the
edge of the base of the unit.
5. Remove and dispose of
dirty filter.
E-7
