Idiomas disponibles
Idiomas disponibles
3. Touching the heating zone selection control, and
an indicator next to the key will flash
4. Select a heat setting by touching the "-" or "+"
control or slider control.
• If you don't choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
If the display flashes
setting
This means that:
• You have not placed a pan on the correct cooking zone or,
• The pan you're using is not suitable for induction cooking or,
• The pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off.
2. Turn the cooking zone off by scrolling down to"0" or touching"-" and"+"
control together. Make sure the display shows"0".
alternately with the heat
42
