Corrective Action - Garland ULTIMATE 820 QG Manual De Instrucciones

Ocultar thumbs Ver también para ULTIMATE 820 QG:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
English
If the engine motor does not work properly (lack of power, unstable idling, etc.) below is a series of symptoms,
their probable cause and solutions.
Symptom
The machine beeps
The engine overheats
The engine does not turn over
The engine stops or does not
maintain an idle state.
Not water flow and pressure fluctuates:
Symptom
Pressure fluctuates or machine
vibrates
Machine starts but no water comes
out.
In any other case, take the machine to the service agent.
Probably cause
Worn segments
Used piston
Crankshaft clearance
Slack in the clutch
Dirty exhaust pipe
Unsuitable fuel
Dirty carburetor
Dirty air filter
Dirty air filter
Poorly-adjusted carburetor
Poorly-adjusted carburetor
Probably cause
Not enough water flow.
Water is frozen
The tap is closed
The ance is blocked
50/160

Corrective action

Send your machine to the service technician
Send your machine to the service technician
Send your machine to the service technician
Send your machine to the service technician
Send your machine to the service technician
Replace the fuel
Send your machine to the service technician
Clean the filter
Clean the filter
Send your machine to the service technician
Send your machine to the service technician
Corrective action
Check that the hose is well connected and
that it has no leaks.
Check that the tap gives enough water flow
to the needs of the machine. Check the filter
and ensure that it is clean.
Ensure water is not frozen
Open the tap
Clean the lance

Capítulos

Tabla de contenido
loading

Tabla de contenido