Idiomas disponibles
Idiomas disponibles
Fig. 3
4. Slide the trigger gun holder in position (Fig. 4).
Fig. 4
Trigger gun holder
5. To assemble the spray wand protector, first snap the tab
into the slot located at the bottom left side of the unit, and
then secure it in place with one 4.8 x 16 screw (Fig. 5).
Nozzle
storage board
Fix with 4.8
x 16 screws
6. Fit the stainless steel lance into the trigger gun and rotate
Fig. 6
7. Connect the high-pressure hose to the trigger gun (Fig. 7).
Fig. 7
7
Fig. 5
4.8 x 16 screw
the collar until the two parts are completely locked (Fig. 6).
Trigger gun
Stainless
steel lance
High-pressure hose
Slot
Tab
Collar
Trigger gun
