Idiomas disponibles
Idiomas disponibles
USING THE MULTIMEDIA REMOTE CONTROL
Operates your TV, VCR, DVD, and Cable converter box. To program the remote control,
see pages 8 ~ 10.
INSTALL BATTERIES AS SHOWN (2 AA, not included)
Notes:
– Do not mix old batteries with new ones or mix
different types of batteries together.
– Remove the batteries if the remote control will not be used
for a month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or dis-
posed of properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
REMOTE CONTROL KEYS
Mode Keys—Use these keys to program the remote control and to select the operating
mode (VCR, TV, or AUX).
To Operate Your...VCR—Press the VCR key. Cable Box or DVD Player—Press the
AUX key. Television—Press the TV key.
Note: Be sure to hold down the mode key while entering a code number, see page 8.
Input Key—Press to select the program source:
TV signal or signal from the DVD Player or other
equipment you have connected to the A/V jacks.
Number Keys—Two keys must be pressed to
select a channel. Example: Press 0 then 6 to select
channel 6. For cable channels 100 through 125,
press and hold the 1 key until C1–– appears. Then
press the other two numbers.
Caption Key—See page 13.
Menu Key—Use this key with the
keys to navigate and adjust features of the
on-screen menu system (see pages 11 ~ 13).
Channel Scanning (CH
(VOL – /+) Keys—Press to scan through the
channels in memory and to adjust the volume.
Mute Key—Press once to minimize the volume.
Press again to restore. Note: When using the audio
out jacks this key will not mute the sound.
VCR/DVD Keys—These keys control VCR or DVD
functions for Fast Forward ( ), Rewind ( ), Play ( ),
•
Record (REC
), Stop ( ), and Pause (II).
and – /+
/
/
) and Volume
VCR
TV
AUX
POWER
INPUT
RESET
1
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
CAPTION
SLEEP
0
0
MENU
RECALL
CH
VOL
VOL
MUTE
DISPLAY
PLAY
REC
STOP
PAUSE
QuickTips
Be sure batteries are
installed correctly.
Point the remote
control toward the
equipment you want
to operate. Objects
between the remote
control and the equip-
ment may cause
misoperation of the
remote control
function.
If the remote control
does not work: Press
T V key (see item 1).
The remote control
must be programmed
before it will operate
your VCR, DVD
Player, or Cable Box.
See pages 8~10.
Note: Sanyo VCR and
DVD codes are pre-
programmed.
Cannot select
channel with number
keys. Press "0"in
front of numbers
1 ~ 9. Example:
Channel 05.
Adjusting the volume
level: Right flashing
arrow indicates
volume is increasing
and Left flashing
arrow indicates
volume is decreasing.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
(Continued on page 8.)
(Continued on page 8.)
7
7
