DeLonghi EO1200 Serie Instrucciones Para El Uso página 2

Idiomas disponibles

Idiomas disponibles

GB-5718111700
12-05-2004
ELECTRICAL CONNECTION
Only use a three-pin, 120 Volt, 60 Hz power socket
This appliance must be grounded: in the event of short circuits, the ground connection reduces the risk of elec-
tric shock, allowing the electrical current to be dispersed.
This appliance is fitted with a power cable with ground wire.
The plug must be connected to a power socket that has been correctly installed and grounded.
WARNING: IMPROPER USE OF THE GROUND WIRE MAY LEAD TO THE RISK OF ELECTRIC SHOCK.
If you are not sure that the power sockets are properly grounded, contact a qualified electrician.
If an extension cord is required, only use three-wire extension cords with three-pin plugs and sockets that fit
the plug on the appliance.
The capacity of the extension cord must be greater than or equal to the rated power input of the appliance.
• The length of the power cable for this appliance has been devised so as to avoid the possibility of trip-
ping on or getting entangled in a long cable.
If a longer cable is required, an extension cord can be used with a rated capacity not below 15 amps,
120 volt and with UL/CSA approval.
• A six-foot long extension cord, with a 15 amp rating, is available from authorized resellers.
When using an extension cord, make sure it does not hang loose in the work area or where someone
may accidentally trip on it or get entangled in it.
• Handle the power cable with care for longer life; avoid pulling or stressing the cable around the connec-
tors to the power socket and the appliance.
CONVERSION TABLE
°C
120 . . . . . . . . . . . . . 250
135 . . . . . . . . . . . . . 275
150 . . . . . . . . . . . . . 300
163 . . . . . . . . . . . . . 325
177 . . . . . . . . . . . . . 350
190 . . . . . . . . . . . . . 375
205 . . . . . . . . . . . . . 400
218 . . . . . . . . . . . . . 425
233. . . . . . . . . . . . . 450
2
10:48
Pagina 2
GROUNDING INSTRUCTIONS
MAKE SURE THAT THE PLUG IS CORRECTLY GROUNDED
°F
loading