Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Volts: 120 A.C. only. Hertz: 60
The wattage rating for your Stand Mixer
is printed on the trim brand or on the
serial plate.
Model KSM7990 Only:
Volts
120
Horsepower
1.3
Hertz
60
Troubleshooting Problems
Please read the following before
calling your service center.
1. The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of
the Stand Mixer. This is normal.
2. The Stand Mixer may emit a pungent
odor, especially when new. This is
common with electric motors.
3. If the flat beater hits the bowl, stop
the Stand Mixer. See "Beater to
Bowl Clearance".
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire or electrical shock.
If your Stand Mixer should
malfunction or fail to operate,
please check the following:
- Is the Stand Mixer plugged in?
- Is the fuse in the circuit to the Stand
Mixer in working order? If you have a
circuit breaker box, be sure the circuit
is closed.
- Turn the Stand Mixer off for 10-15
seconds, then turn it back on. If the
mixer still does not start, allow it to
cool for 30 minutes before turning it
back on.
If the problem is not due to one of the
above items, see the KitchenAid
Warranty. Do not return the Stand Mixer
to the retailer, as they do not provide
service.
®
7
