Idiomas disponibles
Idiomas disponibles
Cleaning the diverter valve
This procedure should take place in an area suitable for servicing
Wear overalls, non-slip shoes, gloves and all other items of PPE
appropriate for the work environment.
•
Remove the dirty water tank and the detergent tank and set them
tank" and "Emptying the dirty water tank".
•
Detach the front squeegee suction hose from the diverter valve.
•
Detach the rear squeegee suction hose from the diverter valve.
•
of the diverter valve.
•
encrustations, and rinse with clean water; wipe the seals of the
cover with a soft cloth.
Do not clean seals with ethyl alcohol.
Cleaning the squeegee
•
Remove the dirty water tank and the detergent tank and set them
tank" and "Emptying the dirty water tank".
•
Pull the handle up perpendicular to the machine.
•
•
ref. 1).
•
Squeegee adjustment
The squeegee is factory-adjusted to give an optimum drying action on
expectations, there are further adjustments that can be made.
To ensure a faultless drying action, the lip of the squeegee blade
the height of the squeegee can be adjusted by raising or lowering the
Replacing the squeegee blades
to become rounded and cracked, with the result that drying is less
thorough and the blade must be replaced. Proceed as follows:
•
Remove the dirty water tank and the detergent tank and set them
tank" and "Emptying the dirty water tank".
! INFORMATION
! WARNING
! INFORMATION
EN
Fig.35
1
1
Fig.36
1
Fig.37
1
Fig.38
1
22
2
