Accessories
•
Brushes; Soft (SPPV02580 code ); Medium [Standard] (SPPV02438
code ); Hard (SPPV02581 code ).
•
Pad Holder (SPPV02582 code ).
•
Standard battery (BAAC00192 code).
•
Battery charger (BACA00263 code).
HANDLING AND INSTALLATION
Lifting and transporting the palletized machine
The machine comes packed in a cardboard box by the manufacturer.
Handle with care to avoid impact and ensure the machine is not
overturned.
Delivery checks
On taking delivery of the machine, check carefully that the packing and
machine it contains are both intact.
Unpacking
When unpacking the machine, proceed as follows:
•
Cut and remove the plastic straps using scissors or nippers;
•
Open the box:
•
Remove the following items from the packaging:
•
use and maintenance manual;
•
quick guide
•
•
bumper wheel;
•
front squeegee:
•
brush;
•
battery charger.
•
•
Pull the handle up at right angles to the machine, referring to the
section "Adjusting the handle rake angle"
•
Remove the dirty water tank and the detergent tank and set them
tank" and "Emptying the dirty water tank".
•
•
Cut the ties applied to the rear squeegee.
•
•
•
Remove the mechanical lock from the switch (Fig.2C).
Keep the packaging materials and store in a safe place: in the event
of relocation or shipment to authorized workshops, the original
packaging will ensure that the machine and battery pack remain
! WARNING
undamaged.
EN
Fig.2
1
Fig.2A
Fig.2B
Fig.2C
11
1
1