Idiomas disponibles
Idiomas disponibles
REPLACING THE TRAILING SHIELD
WARNING:
mower.
WARNING:
working. Never operate the mower with damaged safety devices. Failure to do so can
result in personal injury. The trailing shield is subject to wear and damage, which could
expose moving parts or allow objects to be thrown. For safety protection, frequently
check the trailing shield and replace it immediately with only the identical replacement
part, listed in this manual.
1. Remove the battery.
2. Turn the mower on its side with the upper surface against a wall.
3. Remove the rear wheel on the top side, following the section "REPLACING THE
WHEELS" in this manual.
4. For self propel mower LM2020SP/
LM2020SP-FC, loosen the wheel
cover locking screw, then remove
the wheel cover from the wheel axle
(Fig. 33).
5. Repeat steps 1 to 3 above to
remove the other rear wheel
and wheel cover (LM2020SP/
LM2020SP-FC only).
56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC
Always remove the battery pack when servicing or transporting the
Never operate the mower unless the trailing shield is in place and
33
Wheel Cover
Locking Screw
Wheel Axle
43
