Idiomas disponibles
Idiomas disponibles
VARIABLE-SPEED SELF-PROPEL SYSTEM (only for LM2020SP/
LM2020SP-FC)
The LM2020SP/LM2020SP-FC mower is equipped with variable-speed self-propel
capability. This system is independent of the blade On-Off switch; it is not dependent
on blade rotation. For example, when you have completed cutting your lawn, you can
use the self propel to propel the mower back to your storage location without blade
rotation. Or you may choose to operate the mower as a non-self-propelled mower to
maximize battery running time.
To operate the self-propel system without blade rotation, pull the self-propel trigger to
the handle.
To turn the self propel off, release the
self-propel trigger (Fig. 17).
The system has variable speed. To
increase the speed, move the self-propel-
speed-control lever forwards. To decrease
the speed, move the self-propel-speed-
control lever backwards.
To operate with the blade
rotating for cutting:
1. Depress the safety button.
2. With the safety button depressed, pull the bail switch upward to the handle and
release the safety button.
3. Hold the bail switch against the handle with your left hand. Pull the self-propel
trigger to the handle with your right hand.
4. With your right hand, hold both the bail switch and the self-propel trigger against
the handle and use your left hand to adjust the self-propel-speed-control lever to
choose the desired speed.
NOTICE:
When you turn off the self propel, for example, at the end of a row, it may
become temporarily locked if you pull backwards on the mower. Simply push ahead
slightly and then move the mower as required.
NOTICE:
During cutting, at times it may be easier to mow around an object, with the
self propel turned off.
28
56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC
17
Self-Propel
Trigger
Self-Propel
Speed-Control
Lever
