Idiomas disponibles
Idiomas disponibles
9.6. Replacing hose and service of checkvalve
20
When removing the hose it is important to hold contra
on the part closest to the block.
Use a 17mm key.
Hold contra on the inner part while using a 19 mm
key to loosen the hose.
If you are only exchanging the hose, please loosen
the opposite end of the hose and go to *.
Use a 15mm key to loosen the outher part of the non
return valve.
Check or exchange o-rings, piston etc.
Tighten the top using a 15mm key.
1
*
1. Identify the hose end with conical seat. Use it for
2. Use the hose end with flat seat for the supply.
2
When you find the right end:
Tighten up the hose with a 19-mm wrench.
the satellite valve.
