Idiomas disponibles
Idiomas disponibles
Quick Guide
nanoeX
Inserting the batteries
2
3
1
Clock setting
A
1
Press
• Press
CLOCK
12-hour (am/pm) or 24-hour.
2
Press
Basic operation
B
POWER
AUTO
HEAT
DRY
COOL
Up
Down
• Press
for approximately 10 seconds to show the temperature as
°C or °F.
To connect to a network
C
• Press to turn the Wireless LAN feature ON or OFF.
• For Wireless LAN Module operation setup, please refer to Setup
Instructions Web Manual.
• If the Wireless LAN LED blinks continuously and you do not want
to use the app, press the Wireless LAN
Indicators
POWER
TIMER
nanoeX
1
Pull out the back cover of
remote control.
2
Insert AAA or R03 batteries.
3
Close the cover.
, then press
CLOCK
for approximately 5 seconds to show the time as
to confi rm.
1
Press
to start/stop the
operation.
• When the unit is ON,
from the remote control display.
2
Press
desired mode.
3
Press TEMP UP, TEMP DOWN to
select the desired temperature.
Selection range:
16.0 °C ~ 30.0 °C / 60 °F ~ 86 °F.
button to turn it off.
to set the time.
disappears
to select the
EN
3
