SELECTING A LOCATION AND SECURING THE SAFE (CONT.)
STEP 2
Position the safe in
desired location.
Use a screw or pencil to mark the
4 mounting locations on the
floor and wall.
NOTE: Make sure to mark
and secure to one wall stud
as shown.
Remove safe from marked location.
STEP 3
SECURING TO WOOD:
Using a 3/16" drill bit, drill a 2.5"
hole in marked location.
SECURING TO MASONRY:
Using a 3/8" drill bit, drill a 2.5" hole
in marked location.
PERSONAL FIREPROOF SAFES
®
WALL STUD
WALL STUD
PAGE 8 of 28
OWNER'S MANUAL
40721-1703