Cooling Operation - Hitachi RAF-25NX2 Manual De Instrucciones

COOLING OPERATION

Use the device for cooling when the outdoor temperature is –10 to 42°C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor unit.
1
Press the FUNCTION selector so that the display indicates
(COOL).
Set the desired FAN SPEED with the
display indicates the setting).
(AUTO)
2
(HI)
(MED)
(LOW)
(SILENT) : Silent.
Set the desired room temperature with the TEMPERATURE buttons
(the display indicates the setting).
3
The temperature setting and the actual room temperature may vary
somewhat depending on conditions.
Press the
a beep. Press the button again to stop operation. The cooling function
does not start if the temperature setting is higher than the current
START
room temperature (even though the
STOP
The cooling function will start as soon as you set the temperature
below the current room temperature.
■ As the settings are stored in memory in the remote controller, you only have
to press the (START/STOP) button next time.
– 10 –
: The FAN SPEED is HI at first and varies to MED
automatically when the preset temperature has
been reached.
: Economical as the room will become cool quickly.
: Quiet.
: More quiet.
(START/STOP) button. Cooling operation starts with
(FAN SPEED) button (the
(OPERATION) lamp lights).