Idiomas disponibles
Idiomas disponibles
8. Connect the other end of the high-pressure hose to
the water outlet on the pressure washer (Fig. 9).
First, push the high-pressure hose end completely onto
the high-pressure water outlet, then screw it on clockwise.
Tighten securely.
(BACK)
Fig. 9
High-pressure
hose
High-pressure
water outlet
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
9. Connect the garden hose adapter (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adapter
(Fig. 10). The garden hose must have an internal diameter
of at least 13 mm (1/2 in.) and must be reinforced.
The water supply must be at least equal to the washer
delivery capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
Fig. 10
(FRONT)
Water inlet
(female
Garden hose
This end to
(male end)
water inlet
coupler)
Garden hose
10. Attach garden hose to water supply (Fig. 11).
Fig. 11
Connect to water supply
Garden hose
m
WARNING!
The intake water temperature must
not exceed 104ºF/40ºC. The water supply must not
exceed 0.7 MPa.
m
CAUTION!
The washer must only be used with clean
water; use of unfiltered water containing corrosive chemicals
will damage the washer.
11. Make sure the motor switch is pushed to the OFF (0)
position before plugging the unit into the power outlet
(Fig. 12).
Fig. 12
9
