SNOWJOE sunjoe SPX2004-SJG Manual Del Operador página 8

3. Slide the hose/cord holder into position (Fig. 3).
Fig. 3
4. Slide the trigger gun holder into position (Fig. 4).
Fig. 4
5. Fit the 4 small tabs on the rear compartment into the
holes in the back of the machine. Push inside until the
rear compartment clicks in. Fix the assembly with the two
small Phillips head screws (Figs. 5 – 6).
Fig. 5
Insert the tab
into the hole
Rear
compartment
Fig. 6
Rear
compartment
Hose/
cord holder
Small Phillips
head screws
6. Fit the Quick-Connect spray wand into the trigger gun and
twist the rotatable end-piece of the wand until the two
parts are completely locked (Fig. 7).
Fig. 7
Trigger gun
holder
Quick-Connect spray wand
7. Screw the end of the high-pressure hose clockwise into
the trigger gun and tighten securely (Fig. 8). To release the
high-pressure hose from the trigger gun, unscrew the end
of the hose counterclockwise.
Fig. 8
8
Trigger gun
Trigger gun
High-pressure hose