SNOWJOE sunjoe SPX2004-SJG Manual Del Operador página 14

Idiomas disponibles

Idiomas disponibles

m
WARNING!
Before reusing, completely flush the unit
out with clear water. Anti-freeze products can damage
paintwork, so you must ensure there is no anti-freeze left in the
system before using it again.
Maintenance
m
CAUTION!
Before working on the pressure washer,
disconnect the plug from the power supply socket.
1. To ensure good performance, check and clean the water
inlet filter (Fig. 26). Remove the pre-filter and water inlet
filter and rinse with warm water to prevent any foreign
matter from clogging the pump (Figs. 27 – 28).
Garden hose adapter
Fig. 26
Fig. 27
Inlet filter
Fig. 28
Pre-filter
(FRONT)
Water inlet filter
pre-filter
2. Clean the nozzle with the needle clean-out tool provided
(Fig. 29). Remove the spray wand from the gun; remove
any dirt from the nozzle hole and rinse.
Fig. 29
Disposal
Recycling the washer
• Do not dispose of electrical appliances as unsorted
municipal waste. Use separate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your
health and well-being.
• When replacing old appliances with new ones, the retailer
is legally obligated to take back your old appliance for
disposal at least free of charge.
Service + Support
If your Sun Joe
SPX2004-SJG electric pressure washer
®
requires service or maintenance, please call the Snow Joe
Sun Joe
customer service center at 1-866-SNOWJOE
®
(1-866-766-9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
S P X 2 0 0 4 - S J G
14
Needle clean-out tool
Serial #:
+
®
loading