Idiomas disponibles
Idiomas disponibles
EurAsian Conformity Mark
Ukrainian mark of conformity
Hold the power lever down against the
handle to keep the engine running.
Release the power lever to stop the
product.
Guaranteed sound power level is 98
dB.
Stop the product.
Open and close the fuel valve
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■
Injury caused by vibration. Always use the right tool for
the job, use designated handles, and restrict working
time and exposure.
■
Hearing injury caused by exposure to noise. Wear
hearing protection and limit exposure
■
Injury caused by contact with the blades
■
Injury caused by thrown objects
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness, and blanching
of the fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■
Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
4
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor.
WARNING
Injuries may be caused or aggravated by prolonged use
of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
WARNING
To avoid serious personal injury, do not attempt
to use the product until you read thoroughly and
understand completely the operator's manual. If you
do not understand the warnings and instructions in the
operator's manual, do not use the product. Call the
authorised service centre for assistance.
DESCRIPTION
See figure 1.
1. Side discharge deflector
2. Primer bulb
3. Fuel cap
4. Starter grip
5. Oil cap/dipstick
6. Height adjustment lever
7. Quick-release fastener
8. Power lever
9. Handle
10. Self-propel bail
11. Rope guide nut
12. Rear discharge door
13. Grass catcher
14. Fuel valve
15. Locking pin
16. Air filter
17. Mulching plug
18. Pins
19. Side discharge door
20. Hooks of side discharge deflector
21. Side discharge door opening
22. Spark plug boot
ASSEMBLY
UNPACKING
The product requires assembly.
■
Carefully inspect the product to make sure no breakage
or damage occurred during shipping.
■
If any parts are damaged or missing, please call your
Ryobi service centre for assistance.
English
